Use code NEWSTUFF at checkout for $2 off each pack! Offer good through 5/15/22

Let's be honest, I could write some big long description about how these are life changing technology that will give you power and speed..... but they just stop your hood pins from beating up your hood and look good doing it! 

One package is 5 plates AND 20 1/8th inch rivets! Everything you need to install them! 

We did design these with a raised center to keep your pins from really beating up the plates or the hood. 

These are the smaller size. Please see the picture compared to the tape measure. If you have the standard flat plate, these are slightly smaller and part of the rivet holes will show. We will have the larger size very soon to be able to directly swap them on. 

24 colors available currently! All colors pictured. Also included in the pictures is comparison photos of 3 sets of colors. Fluorescent Yellow, Glow Yellow, and Yellow.  Blue, Glow Blue, Neon Blue, Speckled Blue, and Robins Egg Blue. Neon Pink, Pink, and Bubble gum. These are to try and show the colors compared to each other. 

Colors:

Orange

Black

White

Red

Purple

Magenta

Blue

Electric Blue

Green

Neon Green

Pink

Neon Pink

Yellow

Fluorescent Yellow

Brown

Gray

Robins Egg Blue

Army Green

Speckled Blue

Wine Red

Glow in the dark Blue

Glow in the dark Yellow

Purple Ice

BubbleGum

We all struggle with where to put our Raceceiver. The clips they come with are flimsy and break so easily! Trying to mount them anywhere in the car usually ends up with them broken and an even bigger pain to try and remount! 

Legacy Race Products has the answer!! We have designed two types of mounts for you!!

The first style mounts directly to your roll cage. It works with both 1.75 and 1.5in tubing. Install is super easy with 2 zip ties. It takes a matter of seconds to put it exactly where you want it to be. 

The second style has 3 holes in it. 2 of them are sized so you can Rivet it directly to a flat surface! The center hole is sized for a 1/4in bolt and washer to fit perfectly so you can bolt it instead! The groove is deep enough to make sure the bolt doesn't rub the back side of your RaceCeiver! 

This mount fits the RaceCeiver Fusion Plus, Legend Plus, and Nitro Bee models. 

Look at our other listings for the RaceCeiver Element and R.E. Switch mounts! 

PRICE INCLUDES FREE SHIPPING!! 

The first few pictures show an older letter style with the rollbar mount on 1.75 and 1.5 tubing! The 4th Picture shows the Rivet mount style, and the 5th picture shows both the Rollbar, and the rivet mount styles side by side. The pictures that follow are in order of the colors listed! We will be updating pictures ASAP!! 

4 NEW COLORS HAVE BEEN ADDED!!! New colors are noted in bold below! Pictures added in order.

Colors:

Orange

Black

White

Red

Purple

Magenta

Blue

Electric Blue

Green

Neon Green

Pink

Neon Pink

Yellow

Fluorescent Yellow

Brown

Gray

Robins Egg Blue

Army Green

Speckled Blue

Wine Red

Blow in the Dark Blue

Glow in the Dark Yellow

Purple Ice

BubbleGum

These are a 3D printed part and as such might have some small cosmetic defects that do not in any way hinder performance. 

Picture this, your at the track, it's sunny and hot... You have been sweating into your helmet all day. Just before your feature the sun has gone down and it's gotten cool. You pull your helmet down and there it is, that gross cold wet feeling of all that sweat getting dragged across your face. 

WE CAN HELP!!! 

Legacy Race Products has come out with their Portable Helmet Dryer!! Running off a 5v USB you can take them anywhere! You can plug it into any USB port. A portable powerbank, your phone charger cord base, a USB cigarette lighter plug, your computer even! 

The legs have rubber feet on them so you can place them anywhere. They also fold in for a much smaller footprint to transport. 

24 COLORS TO CHOOSE FROM!! Colors listed below. Pictures of all colors loaded as quickly as we can get them! 

We have LED and NON LED versions available, simply pick which one you'd like with the color of your choice!  The LED version color shifts automatically. 

Still on the fence? Well what if we throw in FREE SHIPPING? 

PICTURED COLOR IS GREEN. PICTURE OF RACEIVER MOUNTS IS REPRESNETATIVE OF OTHER COLORS OFFERED. WE WILL HAVE PICTURES OF COLORS AS DRYERS ASAP! 

Colors:

Orange

Black

White

Red

Purple

Magenta

Blue

Electric Blue

Green

Neon Green

Pink

Neon Pink

Yellow

Fluorescent Yellow

Brown

Gray

Robins Egg Blue

Army Green

Speckled Blue

Wine Red

Glow in the Dark Blue

Glow in the Dark Yellow

Purple Ice

BubbleGum

These are a 3D printed part and as such might have some small cosmetic defects that do not in any way hinder performance. 

We all struggle with where to put our RaceCeiver. The clips they come with are flimsy and break so easily! Trying to mount them anywhere in the car usually ends up with them broken and an even bigger pain to try and remount! 

Legacy Race Products has the answer!! We have designed two types of mounts for you!!

The first style mounts directly to your roll cage. It works with both 1.75 and 1.5in tubing. Install is super easy with 2 zip ties. It takes a matter of seconds to put it exactly where you want it to be. 

The second style has 3 holes in it. 2 of them are sized so you can Rivet it directly to a flat surface! The center hole is sized for a 1/4in bolt and washer to fit perfectly so you can bolt it instead! The groove is deep enough to make sure the bolt doesn't rub the back side of your RaceCeiver! 

This mount fits the RaceCeiver Element. 

Look at our other listings for the RaceCeiver Fusion and R.E. Switch mounts! 

PRICE INCLUDES FREE SHIPPING!! 

Pictures show the Element in a Rivet style mount. The 3rd picture shows both styles of mounts. The 4th picture is all the colors available in order listed below! 

4 NEW COLORS!!! Picture added of the new colors and they are highlighted in bold below! 

Colors:

Orange

Black

White

Red

Purple

Magenta

Blue

Electric Blue

Green

Neon Green

Pink

Neon Pink

Yellow

Fluorescent Yellow

Brown

Gray

Robins Egg Blue

Army Green

Speckled Blue

Wine Red

Glow in the Dark Blue

Glow in the Dark Yellow

Purple Ice

BubbleGum

These are a 3D printed part and as such might have some small cosmetic defects that do not in any way hinder performance. 

We all struggle with where to put our Switch radios. The clips they come with are flimsy and break so easily! Trying to mount them anywhere in the car usually ends up with them broken and an even bigger pain to try and remount! 

Legacy Race Products has the answer!! We have designed two types of mounts for you!!

The first style mounts directly to your roll cage. It works with both 1.75 and 1.5in tubing. Install is super easy with 2 zip ties. It takes a matter of seconds to put it exactly where you want it to be. 

The second style has 3 holes in it. 2 of them are sized so you can Rivet it directly to a flat surface! The center hole is sized for a 1/4in bolt and washer to fit perfectly so you can bolt it instead! The groove is deep enough to make sure the bolt doesn't rub the back side of your Switch! 

This mount fits the Racing Electronics Switch. 

Look at our other listings for the RaceCeiver Element and Fusion mounts! 

PRICE INCLUDES FREE SHIPPING!! 

The first 2 pictures show the Switch inside the mount. The 3rd picture shows the difference in the Rollbar and Rivet/Bolt mounts. The 4th picture is of all the available colors in order of the list below!!  

4 NEW COLORS HAVE BEEN ADDED!!! New colors are noted in bold below! 

Colors:

Orange

Black

White

Red

Purple

Magenta

Blue

Electric Blue

Green

Neon Green

Pink

Neon Pink

Yellow

Fluorescent Yellow

Brown

Gray

Robins Egg Blue

Army Green

Speckled Blue

Wine Red

Glow in the Dark Blue

Glow in the Dark Yellow

Purple Ice

BubbleGum

These are a 3D printed part and as such might have some small cosmetic defects that do not in any way hinder performance. 

NEW RIVET MOUNT OPTION!!

We have been there, you throw your black gloves over on the passenger side of the car after your race. Your parked out in the spot that doesn't have much light. You just wanna grab the rest of your gear to load up and leave. You cannot find them for the life of you though! They blend in so good!! 

Legacy Race Products to the rescue!  This baby packs 480 lumens of glove finding goodness! With the built in switch you can wire it up straight to power and ground then flip it on anytime you need extra light. Don't need the switch? Check out our Simple dome light if you would rather have a smaller foot print with no switch. 

There are now two mounting options available. The trusty roll bar style with a simple 2 zip tie mount it is super easy to install on your overhead roll bar! Then just run the attached wires to power and ground and your ready to go! These are designed to fit both 1.75 and 1.5 tubing. The NEW Rivet mount style has 2 wings off the sides that are designed for 1/8th in rivets. Don't worry, we include them for you! This style allows you to simply rivet the light wherever you have space. 

Each light ships with 10ft (at least) of Black and 10ft of Red 18g wiring coming out of the light, 3 heat shrink butt connectors, 1/4 and 3/8 heat shrink ring terminals as well. The 

PRICE INCLUDES FREE SHIPPING!! 

These are available in Orange, Black, Blue, Green, Purple, White, Red, Yellow, and Magenta. More colors coming very soon! 

These are a 3D printed part and as such might have some small cosmetic defects that do not in any way hinder performance.

Tired of scouring the junkyard for a perfect bump stop? Tired of spending good money on aftermarket bump stops just to have to modify them to fit your struts? Tired of those same bump stops wearing out quickly? 

Legacy Race Products has a solution for you! 

These bump stops have been made with a larger center bore of 22mm to fit most stock struts. They are available in 3 heights. 2in tall to mimic most stock bumps. 1.5in and 1in for those looking for something shorter. We do NOT recommend cutting down taller bumpstops for less height. It will weaken them and cause a shorter life span. 

There are 3 current stiffness available. Soft, Medium, and Hard are the new rating system. Rate chart coming soon. All bumpstops bottom out to roughly the same rating, the Soft bumps will take longer to get to that maximum and the Hard stiffness will hit it sooner. Medium is a good mix between the two and what we would recommend for someone looking for a little stiffer then stock but not too stiff. 

The shorter versions of each stiffness will have a bit more spring rate then the taller version. This is just due to the nature of their construction.  

All bumpstops are available only in black currently. We will be adding more colors soon. We will be updating the pictures ASAP to reflect the actual bumpstops available. 

Price is PER BUMPSTOP